Epson Stylus Pro 9000 Service Manual - Page 72
Carriage Lock Release, Carriage Cover Removal, shown below
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
EPSON Stylus Pro 9000 1. Turn the ink valve knob located on the sides of the Ink Cartridge Holders to the "Close" position, or depress and then lift up the I/C Holder levers. Both operations perform the same function of shutting off the flow of ink from the ink cartridges. 2. Manually release the Carriage Lock by pulling up on the release lever as shown below, and then move the carriage away from the capping position. 3. Remove two screws (CB M3x6) as shown below, and remove the carriage cover. Carriage Lock Release Figure 4-24. Carriage Lock Release Disassembly & Assembly CB M3x6 screw Figure 4-25. Carriage Cover Removal 72
EPSON Stylus Pro 9000
Disassembly & Assembly
72
1.
Turn the ink valve knob located on the sides of the Ink Cartridge Holders to
the “Close” position, or depress and then lift up the I/C Holder levers. Both
operations perform the same function of shutting off the flow of ink from the
ink cartridges.
2.
Manually release the Carriage Lock by pulling up on the release lever as
shown below, and then move the carriage away from the capping position.
Figure 4-24.
Carriage Lock Release
3.
Remove two screws (CB M3x6) as shown below, and remove the carriage
cover.
Figure 4-25.
Carriage Cover Removal
Carriage Lock Release
CB M3x6 screw