Epson TM T88II User Manual - Page 26
Adjustments and Settings, This can warn you when the paper is almost out. If you find - dip switch
View all Epson TM T88II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Adjustments and Settings TM-T88II Series printers are set up at the factory to be appropriate for almost all users. There are, however, some settings for users with special requirements. Your printer has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as print density. TM-T88II Series printers also have a near-end sensor for the paper. This can warn you when the paper is almost out. If you find that there is not enough paper remaining on the roll when the near-end detector is triggered, you can change the near-end sensor setting. See Appendix A, if you need to make any of these changes. 1-12 Setting Up the Printer
1-12
Setting Up the Printer
Adjustments and Settings
TM-T88II Series printers are set up at the factory to be appropriate
for almost all users. There are, however, some settings for users
with special requirements.
Your printer has DIP switches that allow you to change
communication settings, such as handshaking and parity check, as
well as print density.
TM-T88II Series printers also have a near-end sensor for the paper.
This can warn you when the paper is almost out. If you find that
there is not enough paper remaining on the roll when the near-end
detector is triggered, you can change the near-end sensor setting.
See Appendix A, if you need to make any of these changes.