Epson TM T88II User Manual - Page 38

Printing speed, when a ladder bar, code is printed, Paper feeding speed, Line spacing default - download

Get Epson TM T88II - B/W Direct Thermal Printer PDF manuals and user guides View all Epson TM T88II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Printing speed - when a ladder bar code is printed: Approximately 42 mm/ second (approximately 1.7''/ second) Notes: Printing speed may be slower, depending on the data transmission speed and the combination of control commands. There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, it is recommended that you use a downloaded bit image. (Changes in printing speed do not occur during downloaded bit image printing). Paper feeding speed: Approximately 120 mm/second (approximately 4.72"/second) continuous paper feeding Line spacing (default): 4.23 mm (1/6") Programmable by control command. Number of characters: Alphanumeric characters: 95 International characters: 32 Extended graphics: 128 × 7 pages (including one space page) Kanji characters: JIS-Level 1, Level 2 (JIS X0208-1990) Character structure: Font A: 12 × 24 (including 2-dot spacing horizontally) Font B: 9 × 17 (including 2-dot spacing horizontally) Kanji: 24 × 24 Font A is the default 4-2 Reference Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
4-2
Reference Information
Notes:
Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
There may be variations in printing after switching the mode of the
printing speed. To prevent this for logo printing, it is recommended
that you use a downloaded bit image. (Changes in printing speed do
not occur during downloaded bit image printing).
Printing speed —
when a ladder bar
code is printed:
Approximately 42 mm/ second
(approximately 1.7’’/ second)
Paper feeding speed:
Approximately 120 mm/second
(approximately 4.72”/second) continuous
paper feeding
Line spacing (default):
4.23 mm (1/6”)
Programmable by control command.
Number of characters:
Alphanumeric characters: 95
International characters: 32
Extended graphics: 128
×
7 pages
(including one space page)
Kanji characters: JIS-Level 1, Level 2
(JIS X0208-1990)
Character structure:
Font A:
12
×
24
(including 2-dot spacing
horizontally)
Font B:
9
×
17
(including 2-dot spacing
horizontally)
Kanji: 24
×
24
Font A is the default