Epson TM T88II User Manual - Page 37

Reference Information, Printing Specifications

Get Epson TM T88II - B/W Direct Thermal Printer PDF manuals and user guides View all Epson TM T88II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 4 Reference Information Printing Specifications Printing method: Dot density: Printing direction: Printing width: Characters per line (default): Character spacing (default): Printing speed - High-speed mode: Printing speed - Low-powerconsumption mode: Thermal line printing 180 dpi × 180 dpi [the number of dots per 25.4 mm (1")] Unidirectional with friction feed 72 mm (2.83"), 512 dot positions 42 (Font A) 56 (Font B) 0.28 mm (.01") (2 dots) (Font A) 0.28 mm (.01") (2 dots) (Font B) Programmable by control command. Approximately 120 mm/second maximum (approximately 4.72"/second maximum) 38 lines/second maximum (computed value for 3.18mm (1/8") feed) 28.4 lines/second maximum (4.23 mm (1/6") feed, at 24 V, 28° C (82° F), density level 2) Speed is adjusted depending on the applied voltage to the printer and head temperature conditions automatically. Approximately 16.5 lines/second (4.23 mm feed (1/6")) Approximately 70 mm/second (approximately 2.76"/second) Reference Information 4-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Reference Information
4-1
Chapter 4
Reference Information
Printing Specifications
Printing method:
Thermal line printing
Dot density:
180 dpi
×
180 dpi [the number of dots per
25.4 mm (1”)]
Printing direction:
Unidirectional with friction feed
Printing width:
72 mm (2.83”), 512 dot positions
Characters per line
(default):
42 (Font A)
56 (Font B)
Character spacing
(default):
0.28 mm (.01”) (2 dots) (Font A)
0.28 mm (.01”) (2 dots) (Font B)
Programmable by control command.
Printing speed —
High-speed mode:
Approximately 120 mm/second
maximum
(approximately 4.72”/second
maximum)
38 lines/second maximum (computed
value for 3.18mm (1/8”) feed)
28.4 lines/second maximum
(4.23 mm (1/6”) feed, at 24 V, 28° C (82° F),
density level 2)
Speed is adjusted depending on the
applied voltage to the printer and head
temperature conditions automatically.
Printing speed —
Low-power-
consumption mode:
Approximately 16.5 lines/second
(4.23 mm feed (1/6”))
Approximately 70 mm/second
(approximately 2.76”/second)