Fujitsu T4220 T4220 User's Guide - Page 47

Using Your Tablet PC from Standby mode, your Tablet PC will return to the point where it left off. To resume operation, you must use the Suspend/Resume button to resume operation, and there must be an adequate power source available, or your Tablet PC will not resume. If you are running your Tablet PC on battery power, be aware that the battery continues to discharge while your Tablet PC is in Standby mode, though not as fast as when fully operational. HIBERNATION (SAVE-TO-DISK) FEATURE The Hibernation feature saves the contents of your notebook's system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature Windows Vista: The default settings are not enabled. To enable or disable the Hibernation feature follow these steps: 1. From the Start menu, select Control Panel. 2. Select "Choose what the power button does" or "Choose what closing the lid does", then make your selections (Do Nothing, Sleep, Hibernate, or Shut Down). Windows XP: The default settings are not enabled. To enable or disable the Hibernation feature follow these steps: 1. From the Start menu, select Settings, and then select Control Panel. 2. From the Control Panel select Power Options. 3. Select the Hibernate tab. Select the box to enable or disable this feature. WINDOWS POWER MANAGEMENT The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters. RESTARTING THE SYSTEM If your system is on and you need to restart it, be sure that you use the following procedure. Windows Vista 1. Click the Start button, and then move the mouse over the right arrow. 2. Select the desired action from the list. Windows XP 1. Click the Start button, and then click Shut Down. 2. Select the Restart option from within the Windows Shut Down dialog box. 3. Click OK to restart your notebook. Your notebook will shut down and then reboot. Turning off your LifeBook notebook without exiting Windows or turning on your notebook within 10 seconds of the notebook being shut off may cause an error when you start the next time. POWER OFF Before turning off the power, check that the hard drive/ optical drive indicator is off. (See Figure 2-3 on page 6). If you turn off the power while accessing a disk, there is a risk of data loss. To ensure that your system shuts down without error, use the Windows shutdown procedure. Be sure to close all files, exit all applications, and shut down your operating system prior to turning off the power. If files are open when you turn the power off, you will lose any changes that have not been saved, and may cause disk errors. Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is: 1. Click the Start button, and then click Shut Down. 2. Select the Shut Down option from within the Windows Shut Down dialog box. 3. Click OK to shut down your notebook. If you are going to store your notebook for a month or more see Care and Maintenance Section. ■ Always power off the computer before transporting and/or packaging it. After shutting down the system, wait until the status LED panel indicates power off condition (i.e., no lights are illuminated). ■ It is possible that the unit may not automatically go to power off or hibernate mode when you close the lid. This situation may occur due to pre-OS boot password security settings or some other application running on the computer. ■ Attempting to transport the computer while power is on may damage the notebook due to shock or overheating since the air vents may be blocked or restricted. 39