Garmin Edge 510 Owner's Manual - Page 16

Troubleshooting, Appendix - for sale

Get Garmin Edge 510 PDF manuals and user guides View all Garmin Edge 510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Replacing the GSC 10 Battery 1 Locate the circular battery cover À on the side of the GSC 10. 2 Use a coin to twist the cover counter-clockwise until it is loose enough to remove (the arrow points to unlocked). 3 Remove the cover and the battery Á. 4 Wait 30 seconds. 5 Insert the new battery with the positive side facing up. NOTE: Do not damage or lose the O-ring gasket. 6 Use a coin to twist the cover clockwise back into place (the arrow points to locked). After you replace the GSC 10 battery, you must pair the GSC 10 with the device again. Troubleshooting Resetting the Device If the device stops responding, you may need to reset it. This does not erase any of your data or settings. Hold for 10 seconds. The device resets and turns on. Clearing User Data You can restore all of the device settings to the factory default values. NOTE: This deletes all user-entered information, but it does not delete your history. 1 Turn off the device. 2 Place your finger on the top left corner of the touchscreen. 3 While holding your finger on the touchscreen, turn on the device. 4 Select . Maximizing Battery Life • Decrease the backlight (page 12). • Shorten the backlight timeout (page 12). • Select the Smart recording interval (page 8). • Turn on the Auto Power Down feature (page 12). • Turn off the Bluetooth wireless feature (page 9). • Select the GPS Only setting (page 10). Decreasing the Backlight 1 Select to open the status page. 2 Use and to adjust the brightness. Adjusting the Backlight Timeout You can decrease the backlight timeout to maximize the battery life. 1 Select > Backlight Timeout. 2 Select an option. Using the Auto Power Down Feature This feature automatically turns off the device after 15 minutes of inactivity. 1 Select > System > Auto Power Down. 2 Select On. Calibrating the Touchscreen 1 From the home screen, select > System > Display > Calibrate Screen. 2 Follow the on-screen instructions. Locking the Touchscreen You can lock the screen to prevent inadvertent screen touches. 1 Select . 2 Select . Unlocking the Touchscreen 1 Select . 2 Select . Getting More Information You can find more information about this product on the Garmin website. • Go to www.garmin.com/ intosports. • Go to www.garmin.com/ learningcenter. • Go to http: / / buy .garmin .com, or contact your Garmin dealer for information about optional accessories and replacement parts. Temperature Readings The device may display temperature readings that are higher than the actual air temperature if the device is placed in direct sunlight, held in your hand, or is charging with an external battery pack. Also, the device will take some time to adjust to significant changes in temperature. Viewing Device Information You can view the unit ID, software version, and license agreement. From the home screen, select > System > About. Appendix Registering Your Device Help us better support you by completing our online registration today. • Go to http: / / my .garmin .com. • Keep the original sales receipt, or a photocopy, in a safe place. Data Fields Some data fields require ANT + accessories to display data. Balance: The current left/right power balance. Balance - 10s Avg. : The 10-second moving average of left/right power balance. 12 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Replacing the GSC 10 Battery
1
Locate the circular battery cover
À
on the side of the GSC
10.
2
Use a coin to twist the cover counter-clockwise until it is
loose enough to remove (the arrow points to unlocked).
3
Remove the cover and the battery
Á
.
4
Wait 30 seconds.
5
Insert the new battery with the positive side facing up.
NOTE:
Do not damage or lose the O-ring gasket.
6
Use a coin to twist the cover clockwise back into place (the
arrow points to locked).
After you replace the GSC 10 battery, you must pair the GSC
10 with the device again.
Troubleshooting
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
Hold
for 10 seconds.
The device resets and turns on.
Clearing User Data
You can restore all of the device settings to the factory default
values.
NOTE:
This deletes all user-entered information, but it does not
delete your history.
1
Turn off the device.
2
Place your finger on the top left corner of the touchscreen.
3
While holding your finger on the touchscreen, turn on the
device.
4
Select
.
Maximizing Battery Life
•
Decrease the backlight (
page 12
).
•
Shorten the backlight timeout (
page 12
).
•
Select the
Smart
recording interval (
page 8
).
•
Turn on the
Auto Power Down
feature (
page 12
).
•
Turn off the Bluetooth wireless feature (
page 9
).
•
Select the
GPS Only
setting (
page 10
).
Decreasing the Backlight
1
Select
to open the status page.
2
Use
and
to adjust the brightness.
Adjusting the Backlight Timeout
You can decrease the backlight timeout to maximize the battery
life.
1
Select
>
Backlight Timeout
.
2
Select an option.
Using the Auto Power Down Feature
This feature automatically turns off the device after 15 minutes
of inactivity.
1
Select
>
System
>
Auto Power Down
.
2
Select
On
.
Calibrating the Touchscreen
1
From the home screen, select
>
System
>
Display
>
Calibrate Screen
.
2
Follow the on-screen instructions.
Locking the Touchscreen
You can lock the screen to prevent inadvertent screen touches.
1
Select
.
2
Select
.
Unlocking the Touchscreen
1
Select
.
2
Select
.
Getting More Information
You can find more information about this product on the Garmin
website.
•
Go to
www.garmin.com/intosports
.
•
Go to
www.garmin.com/learningcenter
.
•
Go to
, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Temperature Readings
The device may display temperature readings that are higher
than the actual air temperature if the device is placed in direct
sunlight, held in your hand, or is charging with an external
battery pack. Also, the device will take some time to adjust to
significant changes in temperature.
Viewing Device Information
You can view the unit ID, software version, and license
agreement.
From the home screen, select
>
System
>
About
.
Appendix
Registering Your Device
Help us better support you by completing our online registration
today.
•
Go to
.
•
Keep the original sales receipt, or a photocopy, in a safe
place.
Data Fields
Some data fields require ANT+ accessories to display data.
Balance
: The current left/right power balance.
Balance - 10s Avg.
: The 10-second moving average of left/right
power balance.
12
Troubleshooting