Gateway M275E User Guide - Page 109
Reattaching the keyboard - m275
View all Gateway M275E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Adding or replacing memory 3 Hold the replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Important Use only memory modules designed for the Gateway M275. 4 Gently push the module down until it clicks in place. Reattaching the keyboard To reattach the keyboard: 1 Rotate the keyboard toward the LCD panel until the keyboard is almost face-up. 2 Insert the tabs on the front of the keyboard under the palm rest. Tabs www.gateway.com 101
101
www.gateway.com
Adding or replacing memory
3
Hold the replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be
inserted in one direction. If the module does not fit, make sure that
the notch in the module lines up with the tab in the memory bay.
4
Gently push the module down until it clicks in place.
Reattaching the keyboard
To reattach the keyboard:
1
Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
2
Insert the tabs on the front of the keyboard under the palm rest.
Important
Use only memory modules designed for the
Gateway M275.
Tabs