Gigabyte GA-X79-UD5 User Manual - Page 38
M.I.T. Current Status, BCLK/PCIe Clock Control, Host Clock Frequency, Processor Base Clock
View all Gigabyte GA-X79-UD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
`` M.I.T. Current Status This screen provides information on CPU/memory frequencies/parameters. `` Advanced Frequency Settings && BCLK/PCIe Clock Control Enables or disables the control of CPU base clock and PCIe bus frequency. Enabled will allow the Host Clock Frequency and Processor Base Clock items below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) && Host Clock Frequency Allows you to manually set the host clock frequency (which controls CPU, PCIe, and memory frequencies) in 0.01 MHz increments. This item is configurable only when BCLK/PCIe Clock Control is enabled. When you change the Host Clock Frequency setting, the Memory Frequency (Mhz) setting below will be changed synchronously. Important: It is highly recommended that the frequency be set in accordance with the CPU specifications. && Processor Base Clock Allows you to configure the Processor Base Clock by multiplying the Host Clock Frequency by several preset host clock multipliers. This item is configurable only when BCLK/PCIe Clock Control is enabled. When you change the Processor Base Clock setting, the Memory Frequency (Mhz) setting below will be changed synchronously. Important: It is highly recommended that the frequency be set in accordance with the CPU specifications. && CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. && CPU Frequency This value is determined by multiplying the Processor Base Clock value by the CPU Clock Ratio value. BIOS Setup - 38 -