Gigabyte GA-X79-UD5 User Manual - Page 87
Create a RAID Array, Create VD, tab. Then
View all Gigabyte GA-X79-UD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
On the main screen of the RAID setup utility (Figure 4), use the left or right arrow key to move through tabs. [ Adapter ] Adapter 0 Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. [ Devices ] [ RAID ] Vendor ID Device ID: BIOS Version: PCI Slot: IRQ Number: Raid Mode: 1B4B:91A2 1.0.1.0025 00 0A RAID0 RAID1 ENTER/SPACE: Select, ESC: Back/Exit Figure 4 Create a RAID Array: Step 1: On the main screen, press on the RAID tab. Then the RAID Config menu appears (Figure 5). Press on the Create VD item. [ Adapter] Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. [ Devices] [ RAID ] RAID Config Create VD Delete VD Wipe out disk Spare Management ENTER/SPACE: Select, ESC: Back/Exit Figure 5 - 87 - Appendix
- 87 -
Appendix
On the main screen of the RAID setup utility (Figure 4), use the left or right arrow key to move through tabs.
Figure 4
ENTER/SPACE: Select, ESC: Back/Exit
Adapter 0
[ Adapter ]
[ Devices ]
[
RAID
]
Vendor ID Device ID:
1B4B:91A2
BIOS Version:
1.0.1.0025
PCI Slot:
00
IRQ Number:
0A
Raid Mode:
RAID0 RAID1
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Figure 5
Create a RAID Array:
Step 1: On the main screen, press <Enter> on the
RAID
tab. Then the
RAID Config
menu appears (Figure 5).
Press <Enter> on the
Create VD
item.
ENTER/SPACE: Select, ESC: Back/Exit
[ Adapter]
[ Devices]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[
RAID
]
Delete VD
Wipe out disk
Spare Management
RAID Config
Create VD