Gigabyte GA-X79-UD5 User Manual - Page 93
Marvell shared library, Marvell 91xx SATA Controller, Marvell 91xx SATA, Controller 32bit Driver
View all Gigabyte GA-X79-UD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Refer to the following for installing the driver during the Windows setup process. Step 1: Restart your system to boot from the Windows XP setup disk and press as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver." A screen will then appear asking you to specify an additional SCSI adapter. Press . Step 2: Insert the floppy disk containing the SATA RAID/AHCI driver and press . Select either the 32-bit or 64bit items depending on whether you want to install the 32-bit or 64-bit version of Windows XP (Figure 4). Both of the Marvell shared library and Marvell 91xx SATA Controller need to be installed. Below we assume that you are installing the 32-bit version. First select Marvell shared library for 32bit (install first) and press . On the next screen, press to return to the screen in Figure 4. Then select Marvell 91xx SATA Controller 32bit Driver and press . When both of the two drivers appear on the confirmation screen, press to continue the driver installation. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Marvell shared library for 32bit (install first) Marvell 91xx SATA Controller 32bit Driver Marvell shared library for 64bit (install first) Marvell 91xx SATA Controller 64bit Driver ENTER=Select F3=Exit Figure 4 Step 3: On the next screen, press to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. - 93 - Appendix