Gigabyte X299 AORUS Gaming 7 Pro Users Manual - Page 91
A-2: Creating a RAID Array, Peripherals\IntelR Virtual RAID
View all Gigabyte X299 AORUS Gaming 7 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
A-2: Creating a RAID Array Step 1: After the system starts, go to the BIOS Setup, make sure Intel® VMD Technology under the BIOS menu is enabled. Step 2: Go to Peripherals\SATA And RST Configuration. Enable SATA Controller(s), set SATA Mode Selection to Intel RST Premium, and enable iRSTe Support. Save the changes and exit BIOS Setup. Step 3: After the system reboots, enter BIOS Setup again. Then enter the Peripherals\Intel(R) Virtual RAID on CPU sub-menu. Press on All Intel VMD Controller. Step 4: Press on Create RAID Volume to enter the Create RAID Volume screen. Step 5: Enter a volume name with 1~16 letters (letters cannot be special characters) under the Name item and press . Then, select a RAID level. (The selections available depend on the number of the hard drives and type of the Intel® VROC Upgrade Key being installed) Step 6: If the SSDs are installed to different VMDs, be sure to press the key on the Enable RAID spanned over VMD Controllers item to enable this function first. X means SSDs managed by different VMDs can be included in a RAID array but the RAID array can be used as a data drive only. - 91 - Configuring a RAID Set