Haier LY26R3A User Manual - Page 2
Important Information - tv lcd
View all Haier LY26R3A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
IMPORTANT INFORMATION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in serious injury by high voltage. *An exclamation mark in a triangle: Major part or accessory of which technical specifications must be followed if it is to be replaced. Warning: To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen. Caution: Please read this manual carefully before using your television and keep this manual in a good place for future reference. To achieve the best performance of your television, read this User's Manual carefully and properly store it for future reference. Information of screen displays and figures in the User's Manual may vary due to technical innovations. Caution: Unauthorized disassembly of this product is prohibited. The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards. Unplug the power supply and antenna of the product when there is a rainstorm, especially Thunderstorm. Do not use damaged or worn electric plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards. Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards. The product must be placed on a solid and stable surface to avoid collapse. Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards. Contact authorized after-sales service if technical service is needed. Keep the product away from a transformer or heat source to avoid fire hazards. Disconnect the product from power supply and contact authorized after-sales service if abnormal sound is heard in the product. Don't use or store inflammable materials near the product to avoid explosion or fire hazards. Don't place the product in a humid area to avoid fire hazards. The antenna of the product should be away from electric cable to avoid electric shocks. Never touch the plug when your hand is wet as this might cause electric shocks. Always make sure that the televisionis well plugged as poor electric connection might cause fire. When antenna is used, measures should be taken to prevent water from flowing down along the cable into the television. Unplug the television, use soft fabric, never chemicals, if you are going to make cleaning of the product. Make sure that no water drops in the product. The plug and electric cable must be kept clean to avoid electric shocks or fire hazards. Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid electric shocks or fire hazards. Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation. About your LCD TV GET TO KNOW YOUR TV Front control panel Rear Terminals Control Source button Menu button Volume up/down button Program up/down button Power button ANT IN USB 2 1REC COMPONENT IN HDMI3 VGA IN 1. YPbPr input 2. YPbPr AUDIO input 3. DVI AUDIO input 4. ANTENNA input 5. HDMI3 input 6. S-VIDEO input 7. EARPHONE output 8. HDMI1 input 9. HDMI2 input 17.OPTICAL 10. AV-VIDEO input 11. Common Interface 12. SCART1 input 13. VGA AUDIO input 14. SCART2 input 15. VGA input 16. USB