Hamilton Beach 70550RL Use & Care - Page 6
Slicer/Shredder
View all Hamilton Beach 70550RL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
840075900 Ev03.qxd 11/13/00 11:39 AM Page 6 Processing Using S -Blade The S-Blade can be used to coarsely chop, finely mince, mix, or puree food to a smooth consistency. 1. Make sure the Control Switch is turned to OFF and the unit is unplugged. 2. Lock the bowl onto base. (See "How to Lock the Bowl" on page 5.) 3. Place the S-blade onto motor shaft of food processor in center of bowl. Turn slowly until blade drops into place. Handle carefully; the blade is sharp. 4. Lock cover onto bowl. (See "How to Lock the Cover" on page 5.) Insert food pusher into food chute. C., S-Blade Motor Shaft 5. Plug in unit and process food. The processing speed and time will determine the finished consistency of the food. The Pulse button can help you avoid overprocessing. 0 Processing Using Slicer/Shredder • To slice or shred cheese, select firm cheese like cheddar, monterey jack, or swiss. Place cheese in freezer for 30 minutes before processing. • The Reversible Slicer/Shredder Disc has a slicing blade on one side and shredding teeth on the other. Place on motor shaft with desired cutting edge facing up. • To julienne vegetables, slice then remove from bowl and restack the vegetables. Pack into food chute with slices vertical. Slice again to make match-stick cut vegetables. 1. Make sure the Control Switch is turned to OFF and the unit is unplugged. 2. Lock the bowl onto base. (See "How to Lock the Bowl" on page 5.) 3. Put Slicer/Shredder Disc on motor shaft with the desired side facing up for either slicing or shredding. Lock cover onto bowl. (See "How to Lock the Cover" on page 5.) Slicer/Shredder Disc ,,,L=oi=z7 C.. 4 o Motor Shaft 4. Cut food to fit food chute. Pack food chute tightly with food. Insert food pusher in chute. Always use the food pusher to feed food into the chute. NEVER PUSH FOOD THROUGH CHUTE WITH HANDS. 5. Plug in unit and process food. 6. Select speed. While pressing on food pusher, select 1 or 2 for high or low speed or PULSE to process food. 7. When food chute is empty, select OFF or release from PULSE position. Wait until blade has stopped rotating before removing cover. 6