HP 100B Maintenance & Service Guide HP 100B All-in-One - Page 21
Computer Setup-Advanced continued, Table 2-6
View all HP 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Table 2-6 Computer Setup-Advanced (continued) Device Options Allows you to set: ● Num Lock State at Power-On (off/on). ● Internal Speaker (some models) (does not affect external speakers). ● NIC Option ROM Download (PXE, Disable, iSCSI). The BIOS contains an embedded NIC option ROM to allow the unit to boot through the network to a PXE server. This is typically used to download a corporate image to a hard drive. The NIC option ROM takes up memory space below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is limited. This F10 option will allow users to disable the downloading of this embedded NIC option ROM thus giving more DCH space for additional PCI cards which may need option ROM space. The default will be to have the NIC PXE option-ROM-enabled. Management Devices Only displayed in the Advanced Menu when the BIOS detects multiple management options. This option is for installed NIC cards that support ASF or DASH. Use the Management Devices menu to select if the BIOS management operations will be through the embedded solution or one of the installed NIC cards. Management Operations Allows you to set: ● MEBx Setup Prompt (enable/disable) ● Unprovision AMT on next boot ● SOL Terminal Emulation Mode ● SOL Local Keyboard (enable/disable) Computer Setup (F10) Utilities 13