HP 100B Maintenance & Service Guide HP 100B All-in-One - Page 67
Optical Drive Bracket, Preparing to Disassemble the Computer, on Rear Cover, Optical Drive
View all HP 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Optical Drive Bracket Description Optical drive bracket Spare part number 646805-001 The optical drive bracket is located under the optical drive. You must remove the optical drive to access the bracket, which is secured by five screws. To remove the optical drive bracket: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29). 2. Remove the rear cover (see Rear Cover on page 30). 3. Remove the optical drive (see Optical Drive on page 36). 4. Remove the five Torx T15M3.0x6.0 screws (1) that secure the optical drive bracket to the computer. 5. Lift the bracket from the computer (2). Figure 6-40 Removing the optical drive bracket To install the optical drive bracket, reverse the removal procedures. Optical Drive Bracket 59