HP 200 HP StorageWorks 200 Storage Virtualization System site preparation guid - Page 47
Removing packaging materials, Using the claw end of a claw hammer, remove the crate clamps
View all HP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removing packaging materials 1. If shipped in a wooden crate: a. Using an 11mm (7/16") ratchet or wrench, remove the six lag screws at the base of the crate. b. Using the claw end of a claw hammer, remove the crate clamps, and then remove the crate panels. WARNING! Crate clamps are under tension. Wear safety glasses and hold onto the clamp with your free hand during removal. HP StorageWorks 200 Storage Virtualization System site preparation guide 47
Removing packaging materials
1.
If shipped in a wooden crate:
a.
Using an 11mm (7/16") ratchet or wrench, remove the six lag screws at the base of the crate.
b.
Using the claw end of a claw hammer, remove the crate clamps, and then remove the crate
panels.
WARNING!
Crate clamps are under tension. Wear safety glasses and hold onto the clamp with
your free hand during removal.
HP StorageWorks 200 Storage Virtualization System site preparation guide
47