HP 200 HP StorageWorks 200 Storage Virtualization System site preparation guid - Page 48
Remove the poly bag covering the cabinet 7., Following the instructions provided on the wooden ramp
View all HP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2. Cut and remove the polyester bands (1). 3. Remove the nails attaching the carton to the pallet (2). 4. Remove the plastic carton fasteners (3). 5. Remove the carton. 6. Remove the accessory boxes (4), ramp (5), and corner pads (6). 7. Using a 6mm hex and 19mm wrench, remove the adapter plates that anchor the cabinet to the pallet. 8. Remove the poly bag covering the cabinet (7). 9. Following the instructions provided on the wooden ramp, attach the ramp to the pallet and roll the cabinet onto the floor. 10. Visually check the unit for any damage. 48 Delivery and unpacking
2.
Cut and remove the polyester bands (1).
3.
Remove the nails attaching the carton to the pallet (2).
4.
Remove the plastic carton fasteners (3).
5.
Remove the carton.
6.
Remove the accessory boxes (4), ramp (5), and corner pads (6).
7.
Using a 6mm hex and 19mm wrench, remove the adapter plates that anchor the cabinet to the pallet.
8.
Remove the poly bag covering the cabinet (7).
9.
Following the instructions provided on the wooden ramp, attach the ramp to the pallet and roll
the cabinet onto the
fl
oor.
10.
Visually check the unit for any damage.
48
Delivery and unpacking