HP 418800-B21 HP StorageWorks 70 Modular Smart Array Enclosure User Guide (434 - Page 18
Installing the enclosure into the rack, Secure the front end of the rails to the rack.
UPC - 882780564640
View all HP 418800-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the enclosure into the rack To install the enclosure into a rack: 1. Secure the front end of the rails to the rack. IMPORTANT: Do not remove the pins from the ends of the rack rails unless you are converting the rails for use in round-hole racks. These load-bearing pins are designed to fit through the holes without being removed. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal. 2. Secure the back end of the rails to the rack. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. 18 Installing the enclosure