HP 8/8 Brocade Access Gateway Administrator's Guide v6.3.0 (53-1001345-01, Jul - Page 33
Adding F_Ports to an N_Port
View all HP 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Access Gateway mapping 2 TABLE 5 Brocade Model 5470 5480 Access Gateway default F_Port-to-N_Port mapping Total Ports F_Ports N_Ports Default F_ to N_Port Mapping 20 1-14 0, 15-19 0, 15-19 are N_ports with failover enabled, failback enabled and PG policy 1, 2 mapped to 0 3, 4 mapped to 15 5, 6, 7 mapped to 16 8, 9 mapped to 17 10, 11 mapped to 18 12, 13, 14 mapped to 19 24 1-16 0, 17-23 0, 17-23 are N_ports with failover enabled, failback enabled and PG policy 1, 2 mapped to 17 9, 10 mapped to 18 3, 4 mapped to 19 11, 12 mapped to 20 15, 16 mapped to 0 5, 6 mapped to 21 13, 14 mapped to 22 7, 8 mapped to 23 Adding F_Ports to an N_Port You can modify the default port mapping by adding F_Ports to an N_Port. Adding an F_Port to an N_Port routes that traffic to and from the fabric through the specified N_Port. You can assign an F_Port to only one primary N_Port at a time. If the F_Port is already assigned to an N_Port, you must remove it from the N_Port before you can add it to a different port. Use the following steps to add an F_Port to an N_Port. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the ag command with the --mapadd n_portnumber "f_port1;f_port2;... "operand to add the list of F_Ports to the N_Port. The f_portlist can contain multiple F_Port numbers separated by semicolons, for example "17;18". switch:admin> ag --mapadd 13 "6;7" F-Port to N-Port mapping has been updated successfully Access Gateway Administrator's Guide 13 53-1001345-01