HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 291

Chapter 3 Ethernet Show Commands show vlan Send comments to [email protected] show vlan To display VLAN information, use the show vlan command. show vlan [brief | name {name} | summary] Syntax Description brief name name summary (Optional) Displays only a single line for each VLAN, naming the VLAN, status, and ports. (Optional) Displays information about a single VLAN that is identified by VLAN name. (Optional) Displays the number of existing VLANs on the switch. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines This command displays information for all VLANs, including private VLANs, on the switch. Each access port can belong to only one VLAN. Trunk ports can be on multiple VLANs. Note Although a port can be associated with a VLAN as an access VLAN, a native VLAN, or one of the trunk allowed ports, only access VLANS are shown under Ports in the display. If you shut down a VLAN using the state suspend or the state active command, these values appear in the Status field: • suspended-VLAN is suspended. • active-VLAN is active. If you shut down a VLAN using the shutdown command, these values appear in the Status field: • act/lshut-VLAN status is active but shut down locally. • sus/lshut-VLAN status is suspended but shut down locally. If a VLAN is shut down internally, these values appear in the Status field: • act/ishut-VLAN status is active but shut down internally. • sus/ishut-VLAN status is suspended but shut down internally. If a VLAN is shut down locally and internally, the value that is displayed in the Status field is act/ishut or sus/ishut. If a VLAN is shut down locally only, the value that is displayed in the Status field is act/lshut or sus/lshut. OL-16599-01 Cisco Nexus 5000 Series Command Reference 3-37