HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 574

fabric-binding database diff Chapter 8 Fibre Channel Commands Send comments to [email protected] fabric-binding database diff To view the differences between the active database and the configuration database in a VSAN, use the fabric-binding database diff command. fabric-binding database diff {active | config} vsan vsan-id Syntax Description active config vsan vsan-id Provides information about the differences in the active database relating to the configuration database. Provides information about information on the differences in the configuration database relating to the active database. Specifies the VSAN. The ID of the VSAN is from 1 to 4093. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and Fibre Channel VSANs. Examples The following example displays the differences between the active database and the configuration database in VSAN 1: switch# fabric-binding database diff active vsan 1 The following example displays information about the differences between the configuration database and the active database: switch# fabric-binding database diff config vsan 1 Related Commands Command fabric-binding copy Description Copies from the active to the configuration fabric binding database. 8-40 Cisco Nexus 5000 Series Command Reference OL-16599-01