HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 417
Command Default, Command Modes, Command History, Usage Guidelines, Examples, Related Commands, Release
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 417 highlights
Chapter 6 Security Commands radius-server host Send comments to [email protected] username name timeout seconds Specifies a username in the test packets. The maximum size is 32 characters. Specifies the timeout (in seconds) between retransmissions to the RADIUS server. The default is 1 second and the range is from 1 to 60 seconds. Command Default Accounting port: 1813 Authentication port: 1812 Accounting: enabled Authentication: enabled Retransmission count: 1 Idle-time: 0 Server monitoring: disabled Timeout: 5 seconds Test username: test Test password: test Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When the idle time interval is 0 minutes, periodic RADIUS server monitoring is not performed. Examples This example shows how to configure RADIUS server authentication and accounting parameters: switch(config)# radius-server host 10.10.2.3 key HostKey switch(config)# radius-server host 10.10.2.3 auth-port 2003 switch(config)# radius-server host 10.10.2.3 acct-port 2004 switch(config)# radius-server host 10.10.2.3 accounting switch(config)# radius-server host radius2 key 0 abcd switch(config)# radius-server host radius3 key 7 1234 switch(config)# radius-server host 10.10.2.3 test idle-time 10 switch(config)# radius-server host 10.10.2.3 test username tester switch(config)# radius-server host 10.10.2.3 test password 2B9ka5 Related Commands Command show radius-server Description Displays RADIUS server information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-83