HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 661
san-port-channel persistent
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 661 highlights
Chapter 8 Fibre Channel Commands san-port-channel persistent Send comments to [email protected] san-port-channel persistent To convert an autocreated SAN port channel to a persistent SAN port channel, use the san-port-channel persistent command. san-port-channel port-channel-id persistent Syntax Description port-channel-id persistent Specifies the port channel ID. The range is 1 to 128. Converts the autocreated SAN port channel to a persistent SAN port channel Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines This command is not reversible. A user-created channel group cannot be converted to an autocreated channel group.When the san-port-channel persistent command is applied to an autocreated channel group, the channel group number does not change and the member ports properties change to those of a user-created channel group. The channel mode remains active. Examples The following example shows how to change the properties of an autocreated channel group to a persistent channel group: switch# san-port-channel 10 persistent Related Commands Command san-port-channel protocol show interface port-channel show port-channel Description Enables the SAN port channel protocol. Displays SAN port channel interface information. Displays SAN port channel information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-127