HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 685
zone mode enhanced
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 685 highlights
Chapter 8 Fibre Channel Commands zone mode enhanced Send comments to [email protected] zone mode enhanced To enable enhanced zoning for a VSAN, use the zone mode enhanced command. To disable this feature, use the no form of the command. zone mode enhanced vsan vsan-id no zone mode enhanced vsan vsan-id Syntax Description vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093. Command Default Disabled. Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Before using the zone mode enhanced command, verify that all switches in the fabric are capable of working in enhanced zoning mode. If one or more switches are not capable of working in enhanced zoning mode, the request to enable enhanced zoning mode is rejected. When the zone mode enhanced vsan command completes successfully, the software automatically starts a session, distributes the zoning database using the enhanced zoning data structures, applies the configuration changes, and sends a release change authorization (RCA) to all switches in the fabric. All switches in the fabric then enable enhanced zoning mode. Examples The following example shows how to enable enhanced zoning mode: switch(config)# zone mode enhanced vsan 10 Related Commands Command show zone Description Displays zone information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-151