HP Cisco MDS 9216A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 301
fex pinning redistribute
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
Chapter 4 Fabric Extender Commands fex pinning redistribute Send comments to [email protected] fex pinning redistribute To redistribute the host interfaces on a Fabric Extender, use the fex pinning redistribute command. fex pinning redistribute chassis_ID Syntax Description chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199. Command Default None Command Modes EXEC mode Command History Release 4.0(1a)N2(1) Modification This command was introduced. Usage Guidelines When you provision the Fabric Extender using the Statically Pinned mode (see the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide), the host interfaces on the Fabric Extender are pinned to the fabric interfaces in the order that they were initially configured. The next time that you reboot the Fabric Extender, the configured fabric interfaces are pinned to the host interfaces in an ascending order by the port number of the fabric interface. Use the fex pinning redistribute command if you want to configure the same fixed distribution of host interfaces without restarting the Fabric Extender after your initial configuration. Caution This command disrupts all the host interface ports of the Fabric Extender. However, the disruption is shorter than would be the case if you reboot the Fabric Extender. Examples This example shows how to redistribute the host interfaces on a Fabric Extender: switch# fex pinning redistribute 101 Related Commands Command pinning max-links show fex show interface interface fex-intf Description Defines the number of uplinks on a Fabric Extender. Displays all configured Fabric Extender chassis connected to the switch. Displays the Fabric Extender ports pinned to a specific switch interface. OL-16599-01 Cisco Nexus 5000 Series Command Reference 4-7