HP D2460 User Guide - Page 74
Solution, To resolve the problem, Print cartridge is in the wrong slot message, Cause, Low on ink
UPC - 808736786652
View all HP D2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 11 Solution: To resolve the problem 1. Raise the printer cover. 2. Do one of the following: • If an error message is displayed on screen, remove the print cartridge that is named in the error message. Go to step 3. • If an error message is not displayed, remove and reinstall each print cartridge and close the printer cover. If the Power light is not flashing, the problem is solved. If the Power light is flashing, go to step 4. 3. Reinstall the print cartridge and close the printer cover. For more information, see Installation instructions. If the Power light is not flashing, the problem is solved. If the Power light is flashing, go to step 4. 4. Manually clean the print cartridge. 5. Reinsert the print cartridge in the printer and close the printer cover. If the Power light is still flashing, the print cartridge is faulty and must be replaced. NOTE: You can print with one print cartridge in ink-backup mode if you do not have a replacement print cartridge available. For more information, see Ink-backup mode. 6. If the Power light continues to flash after replacing the print cartridge, visit HP Technical Support at www.hp.com/support. "Print cartridge is in the wrong slot" message Cause: If you receive this error message, the print cartridge is installed in the wrong side of the print cartridge cradle. Solution: Always install the tri-color print cartridge in the left print cartridge cradle compartment. Install the black or photo print cartridge in the right print cartridge cradle compartment. Low on ink Cause: At least one of the print cartridges is estimated to be low on ink and may need to be replaced soon. Solution: Have a replacement cartridge on hand to avoid printing interruptions. You do not have to replace the cartridge until print quality deteriorates. If you have installed a refilled or remanufactured print cartridge, or a cartridge that has been used in another printer, the ink level indicator will be inaccurate or unavailable. For information on how to replace print cartridges, see Replace print cartridges. 72 Troubleshooting