HP D2460 User Guide - Page 79
Image is printed at an angle, Fading occurs on the edges of a photo, Photo has an unwanted border
UPC - 808736786652
View all HP D2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Image is printed at an angle Verify that no problem exists with the source image. For example, if you are printing a scanned image, verify that the image was not crooked when it was scanned. If the problem is not caused by the source image, follow these steps: 1. Remove all paper from the paper tray. 2. Load the photo paper correctly in the paper tray. 3. Verify that the paper guide fits firmly against the edge of the paper. 4. Follow loading instructions for the paper type. Fading occurs on the edges of a photo Verify that the photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, then use photo paper that is not curled. For instructions about preventing photo paper from curling, see Store and handle photo paper. Photo has an unwanted border • For small photo paper • For small photo paper with a tear-off tab Problems with borderless documents 77