Home » HP Manuals » Printers » HP Designjet T2300 » Manual Viewer

HP Designjet T2300 HP Designjet T2300 eMFP Printer series - Image Quality Trou - Page 35

Incorrect paper advance, skew during scanning, or horizontal wrinkles

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

4. If the problem persists, analyze pattern number 7 in modules A through E of the diagnostic plot. A correct example is given below, followed by two incorrect examples. Note that there is a black ring near the center of pattern 7. In this step, you must look at the region near the black ring. If you can see discontinuities in the black and white lines, call HP support and report a "defocus or blurring" error. Scan-quality issues Incorrect paper advance, skew during scanning, or horizontal wrinkles You may encounter problems with some thick glossy originals being moved through the scanner's paper path. In some cases, the original may become skewed during the scanning process. If some of the paper rollers are not working correctly, you may find small horizontal wrinkles in the scanned image, due to the paper being stuck in some regions while not in others. ENWW Incorrect paper advance, skew during scanning, or horizontal wrinkles 31

Section	Page
Introduction	5
Most-common issues resolution	5
Troubleshooting print-quality issues	7
General advice	8
Horizontal lines across the image (banding)	8
Lines are too thick, too thin or missing	9
Lines appear stepped or jagged	9
Lines print double or in the wrong colors	10
Lines are discontinuous	11
Lines are blurred	11
Line lengths are inaccurate	12
The whole image is blurry or grainy	12
The paper is not flat	13
The print is scuffed or scratched	13
Ink marks on the paper	14
Horizontal smears on the front of coated paper	14
Ink marks on the back of the paper	15
Black ink comes off when you touch the print	15
Edges of objects are stepped or not sharp	15
Edges of objects are darker than expected	15
Horizontal lines at the end of a cut sheet print	15
Vertical lines of different colors	16
White spots on the print	16
Colors are inaccurate	16
Color accuracy using EPS or PDF images in page layout applications	17
Colors are fading	17
The image is incomplete (clipped at the bottom)	17
The image is clipped	18
Some objects are missing from the printed image	19
A PDF file is clipped or objects are missing	19
The Image Diagnostics Print	19
Corrective action	21
If you still have a problem	21
Troubleshooting scan-quality issues	22
Random vertical lines	23
Wrinkles or folds	23
Line discontinuities	24
Grain in area fills when scanning plain paper	25
Small color differences between adjacent CIS modules	26
Vertical light lines at the intersection between CIS modules	27
Variable line thickness or missing lines	28
Inaccurately reproduced colors	28
Color fringing	29
Clipping in dark or light areas	30
Flare in the image when scanning glossy originals	31
Vertical red and green bands over white or black background	31
The stop-start effect	32
Vibration	33
Horizontal periodical banding	33
Defocus, blurring and fading colors	34
Incorrect paper advance, skew during scanning, or horizontal wrinkles	35
Vertical black band 20 cm wide	36
The scanner damages some originals	37
Completely wrong colors	37
Vertical distortion	38
Object replication (ghosting)	38
Clipping or incorrect scale factor when down-scaling in copies and prints	39
Incorrect edge detection, mostly when scanning tracing paper	40
A copied or scanned image is very skewed	40
Scanner maintenance	41
Clean the scanner’s glass plate	42
Calibrate the scanner	43
The scanner diagnostic plot	45
Prepare the product and the paper to print the diagnostic sheet	46
Visual check for errors while printing the diagnostic sheet	46
Resolution	46
Alignment	47
Loss of shadow or highlight details	48
Printer banding	48
Streaks	49
Grain	49
Scan or copy the diagnostic plot	49
Monitor calibration	50
Save the diagnostic plot for future use	50

Match case Limit results 1 per page

If the problem persists, analyze pattern number 7 in modules A through E of the diagnostic plot. A

correct example is given below, followed by two incorrect examples. Note that there is a black

ring near the center of pattern 7. In this step, you must look at the region near the black ring. If

you can see discontinuities in the black and white lines, call HP support and report a “defocus or

blurring” error.

Incorrect paper advance, skew during scanning, or

horizontal wrinkles

You may encounter problems with some thick glossy originals being moved through the scanner’s

paper path. In some cases, the original may become skewed during the scanning process.

If some of the paper rollers are not working correctly, you may find small horizontal wrinkles in the

scanned image, due to the paper being stuck in some regions while not in others.

ENWW

Incorrect paper advance, skew during scanning, or horizontal wrinkles

Scan-quality issues