HP Dv7-2170us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 56
Hard drive, procedure can be used to remove the hard drive from either hard drive bay.
UPC - 884962256558
View all HP Dv7-2170us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Hard drive NOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover with tab, and 4 rubber isolators. Description Spare part number 500-GB, 5400-rpm 509417-001 320-GB, 7200-rpm 509413-001 320-GB, 5400-rpm 509415-001 250-GB, 7200-rpm 509412-001 250-GB, 5400-rpm 509414-001 Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with 517639-001 tab, and 4 rubber isolators) Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the primary hard drive cover (see Primary hard drive cover on page 46). If you are removing the secondary hard drive, remove the secondary hard drive cover also (see Secondary hard drive cover on page 56 ). NOTE: In order to remove the secondary hard drive cover, the primary hard drive cover must be removed first. NOTE: This computer has two hard drives in two separate hard drive bays. The following procedure can be used to remove the hard drive from either hard drive bay. Remove the hard drive: 1. Use the Mylar tab (1) to slide the hard drive to the left (2), and disconnect the hard drive cable (3) from the system board. 48 Chapter 4 Removal and replacement procedures