HP Dv7-2170us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 76

components on a standard display panel, remove the two rubber screw covers

Page 76 highlights

3. Disconnect the TV tuner cable from the system board (4). CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 4. Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer. 5. Remove the display assembly (2). NOTE: Steps 6 through 9 provide display panel removal information for computer models equipped with BrightView display assemblies. See steps 10 through 14 for display panel removal information for computer models equipped with flush glass display assemblies. 6. If it is necessary to replace the display enclosure or any of the display assembly internal components on a standard display panel, remove the two rubber screw covers (1) on the display bezel lower edge. The display rubber screw covers are included in the Display Rubber Kit, spare part number 516308-001. 68 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165

3.
Disconnect the TV tuner cable from the system board
(4)
.
CAUTION:
Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer
components.
4.
Remove the four Phillips PM2.5×7.0 screws
(1)
that secure the display assembly to the computer.
5.
Remove the display assembly
(2)
.
NOTE:
Steps 6 through 9 provide display panel removal information for computer models
equipped with BrightView display assemblies. See steps 10 through 14 for display panel removal
information for computer models equipped with flush glass display assemblies.
6.
If it is necessary to replace the display enclosure or any of the display assembly internal
components on a standard display panel, remove the two rubber screw covers
(1)
on the display
bezel lower edge. The display rubber screw covers are included in the Display Rubber Kit, spare
part number 516308-001.
68
Chapter 4
Removal and replacement procedures