HP Dv7-2170us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 99
Fan/heat sink assembly
UPC - 884962256558
View all HP Dv7-2170us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2. Remove the power connector from the base enclosure (3) and release the power connector cable from the routing channel (4). Reverse this procedure to install the power connector cable. Fan/heat sink assembly NOTE: The fan/heat sink assembly spare kit includes replacement thermal material. Description Thermal module, discrete graphics subsystem (includes fan/heat sink assembly) Thermal module, UMA graphics subsystem memory (includes fan/heat sink assembly) Spare part number 533735-001 533736-001 NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan/heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 91