HP EliteBook 735 PC Commercial BIOS UEFI Setup - Page 30

HP PC Commercial BIOS (UEFI) Setup July 2020 919946-004 Local Access Key Clear EBAM Local Access Key(s) and Reboot Setting (Display Only) Action • Present • Not Present This action deletes all currently established local access keys created for Enhanced BIOS Authentication Mode (EBAM) Not Present 4.7 Smart Cover Menu This submenu controls settings for Cover Lock and Cover Sensor Including those associated with the HP Tamper Lock feature. These settings are only present when the implied optional devices are installed in the system. Table 17 Smart Cover Menu features Feature Cover Lock Type Setting Cover Removal Sensor Setting Power off upon cover removal Setting Description The Smart Cover Lock is a software-controllable solenoid lock. This lock restricts unauthorized access to the system's internal components. The following settings are possible: • Lock • Unlock The Cover Removal Sensor has the following settings: • Disabled • Notify the User: Displays warning message on next boot if opened. • Administrator Password (when password is set or Sure Admin Enhanced BIOS Authentication Mode is enabled with a Local Access Key set): Requires entering the administrator password or the PIN (is Local Access Key is present) before continuing to boot after the cover is opened. • Administrator Credential: exactly the same behavior as Administrator Password. When checked, if the cover is removed while the system is on or asleep (S3 or Modern Standby), then system will immediately power down. This setting is only active and can only be modified while Cover Sensor Removal is enabled. This only effects cover removals that occur after the setting is set. Default Unlock Disable Disable Notes Desktop with Cover Lock Reboot Required System with Cover Sensor Reboot Required Administrator Credential may not be available on all systems that support Smart Cover. May not be available on all systems that support Smart Cover. Clear TPM on boot after cover removal Setting When enabled, if the cover is removed, then TPM will be cleared on the boot after the cover was removed. This setting is only active and can only be modified while Cover Removal Sensor is enabled. These only effects cover removals that occur after the setting is set. Disable May not be available on all systems that support Smart Cover. Last Cover Removal and Count Setting (Display Only) This reports the last time the cover was removed and how many times it has been removed and acknowledged since it left the factory, in the following format: MM/DD/YYYY HH:MM:SS. X times. Depending on system factors, consecutive cover removals may count as a single cover removal. The date and time may be reported as all 0's in cases where the value cannot be determined such as real-time clock power loss. 0 times May not be available on all systems that support Smart Cover. © Copyright 2016-2020 HP Development Company, L.P. 4 Security Menu 30