HP EliteBook 8460p Service Guide - Page 102
straight up and remove it., Lift the processor
View all HP EliteBook 8460p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6. Remove the fan (see Fan on page 89). 7. Remove the heat sink (see Heat sink on page 90). Remove the processor: 1. Position the computer upside-down with the front toward you. 2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. 3. Lift the processor (2) straight up and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor slot when you install the processor. Reverse this procedure to install the processor. 94 Chapter 4 Removal and replacement procedures
6.
Remove the fan (see
Fan
on page
89
).
7.
Remove the heat sink (see
Heat sink
on page
90
).
Remove the processor:
1.
Position the computer upside-down with the front toward you.
2.
Use a flat-bladed screwdriver to turn the processor locking screw
(1)
one-half turn
counterclockwise until you hear a click.
3.
Lift the processor
(2)
straight up and remove it.
NOTE:
The gold triangle
(3)
on the processor must be aligned with the triangle
(4)
embossed
on the processor slot when you install the processor.
Reverse this procedure to install the processor.
94
Chapter 4
Removal and replacement procedures