HP EliteBook 8460p Service Guide - Page 78
Smart card reader, Disconnect the cable from the system board connector
View all HP EliteBook 8460p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Smart card reader Description Smart card reader assembly for use in 8460p/w models Smart card reader assembly for use in 6460b models Spare part number 642769-001 654823-001 Before removing the smart card reader assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 63). 5. Remove the bottom door (see Bottom door on page 69). Remove the smart card reader assembly: 1. Position the bottom cover upside-down with the front toward you. 2. Disconnect the cable from the system board connector (1). 3. Flex the tabs (2) that secure the board to the plastic holder, and then remove the board from the plastic holder (3). Reverse this procedure to install the smart card reader assembly. 70 Chapter 4 Removal and replacement procedures