HP EliteBook 8460p Service Guide - Page 117
Display assembly components (cable, antennas, hinges, enclosure
View all HP EliteBook 8460p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Display assembly components (cable, antennas, hinges, enclosure) This section describes removing components that require you to completely remove the display panel. For more information about removing display components that do not require that you remove the assembly from the computer, see Display assembly components (panel, bezel, webcam, microphone) on page 65. All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables. For a list of display spare parts, see Display components on page 36. Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 63). 5. Remove the following components: a. Remove the bottom door (see Bottom door on page 69). b. Hard drive (see Hard drive on page 75) c. Optical drive (see Optical drive on page 71) d. WLAN module (see WLAN module on page 82) e. WWAN module (see WWAN module on page 80) f. Fan (see Fan on page 89) g. Heat sink (see Heat sink on page 90) h. Modem module (see Modem module on page 88) i. Keyboard (see Keyboard on page 95) j. Bottom cover (see Bottom cover on page 97) Remove the display assembly: 1. Position the computer right-side up with the front toward you. Component replacement procedures 109