HP ElitePad Mobile POS G2 Maintenance and Service Guide - Page 40
to which the TouchScreen cable is attached, and, Release the zero insertion force ZIF connector
View all HP ElitePad Mobile POS G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
12. Open the retention gate (2). 13. Slide the tablet out of the service tool (3). 14. Disconnect the suction cup handles (1). 15. Lower the suction cup handle (2). 16. Remove the suction cup (3). 17. Slide the display assembly (1) to the left until the display assembly cables and connectors are accessible. 18. Release the zero insertion force (ZIF) connector (2) to which the TouchScreen cable is attached, and then disconnect the TouchScreen cable (3) from the system board. 32 Chapter 5 Removal and replacement procedures
12.
Open the retention gate
(2)
.
13.
Slide the tablet out of the service tool
(3)
.
14.
Disconnect the suction cup handles
(1)
.
15.
Lower the suction cup handle
(2)
.
16.
Remove the suction cup
(3)
.
17.
Slide the display assembly
(1)
to the left until the display assembly cables and connectors
are accessible.
18.
Release the zero insertion force (ZIF) connector
(2)
to which the TouchScreen cable is attached, and
then disconnect the TouchScreen cable
(3)
from the system board.
32
Chapter 5
Removal and replacement procedures