HP ElitePad Mobile POS G2 Maintenance and Service Guide - Page 54
Audio jack board, from the system board.
View all HP ElitePad Mobile POS G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Audio jack board Description Audio jack board (includes audio jack and cable) Spare part number 747627-001 Before removing the audio jack board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 28). 5. Remove the NFC antenna (see NFC antenna on page 35). Remove the audio jack board: 1. Disconnect the audio jack board cable (1) from the system board. 2. Remove the two Phillips PM1.3×2.0 screws (2) that secure the audio jack board to the bottom cover. 3. Remove the audio jack board (3) and cable. Reverse this procedure to install the audio jack board. 46 Chapter 5 Removal and replacement procedures