HP ElitePad Mobile POS G2 Maintenance and Service Guide - Page 58
System board, Power button board see
View all HP ElitePad Mobile POS G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
System board NOTE: The system board spare part kit is equipped with an Intel Atom z3795 quad core 1.60-GHz processor (burst up to 2.39-GHz; 2.0-MB L2 cache), 4096-MB of system memory, and includes the power button actuator, processor, and replacement thermal material. Description Spare part number Equipped with 128-GB eMMC storage, an NFC module, and the Windows 10 or Windows 8 Professional operating system 824500-601 Equipped with 128-GB eMMC storage, an NFC module, and the Windows 10 or Windows Embedded Industry 8.1 64-bit Retail Solutions operating system 824500-401 Equipped with 128-GB eMMC storage, an NFC module, and a non-Windows operating system 824500-001 Equipped with 128-GB eMMC storage and the Windows 10 or Windows 8 Professional operating system 829007-601 Equipped with 128-GB eMMC storage and a non-Windows operating system 829007-001 Equipped with 64-GB eMMC storage, an NFC module, and the Windows 10 or Windows 8 Professional operating system 824499-601 Equipped with 64-GB eMMC storage, an NFC module, and the Windows 10 or Windows Embedded Industry 8.1 64-bit Retail Solutions operating system 824499-401 Equipped with 64-GB eMMC storage, an NFC module, and a non-Windows operating system 824499-001 Equipped with 64-GB eMMC storage and the Windows 10 or Windows 8 Professional operating system 824501-601 Equipped with 64-GB eMMC storage and the Windows 10 or Windows Embedded Industry 8.1 64-bit Retail Solutions operating system 824501-401 Equipped with 64-GB eMMC storage and a non-Windows operating system 824501-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 28), and then remove the following components: a. NFC antenna (see NFC antenna on page 35) b. WWAN module (see WWAN module on page 36) c. Power button board (see Power button board on page 42) d. Battery (see Battery on page 48) Remove the system board: 1. Release the forward-facing webcam (1) from the molding built into the bottom cover. 2. Disconnect the audio jack board cable (2) from the system board. 50 Chapter 5 Removal and replacement procedures