HP J4865A User Manual - Page 69
B. Switch Ports and Network Cables, Switch Ports, Twisted Pair, Fiber-Optic
View all HP J4865A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
B Switch Ports and Network Cables Not e This appendix includes switch connector information and network cable information for cables that should be used with the Series 4100gl Switches, including minimum pin-out information and specifications for twisted-pair cables. Incorrectly wired cabling is the most common cause of problems for LAN communications. HP recommends that you work with a qualified LAN cable installer for assistance with your cabling requirements. Switch Ports Twisted Pair ■ The RJ-45 ports on the 10/100-TX gl Module, the 100/1000-T gl Module, and the on the 100/1000-T Transceiver accept 100-ohm differ ential unshielded and shielded twisted-pair cable with RJ-45 connectors as described on the next page. Fiber-Optic ■ The SC-type connector port on the 100Base-FX Transceiver transmits at 1300 nm wavelength, and accepts the multimode fiber-optic cables for 100Base-FX described on page B-3. ■ The SC-type connector port on the Gigabit-SX Transceiver and the LCtype connector port on the Gigabit-SX LC mini-GBIC Transceiver transmit at 850 nm wavelength, and accept the low metal content, multimode fiber-optic cables for Gigabit-SX described on page B-3. ■ The SC-type connector port on the Gigabit-LX Transceiver and the LCtype connector port on the Gigabit-LX LC mini-GBIC Transceiver transmit at 1300 nm wavelength, and accept the low metal content, single mode or multimode fiber-optic cables for Gigabit-LX described on page B-3. Switch Ports and Network Cables B-1