HP J4865A User Manual - Page 71
Twisted-Pair Cable/Connector Pin-Outs, Fiber-Optic Cables, The HP Auto-MDIX Feature:.
View all HP J4865A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Switch Ports and Network Cables Twisted-Pair Cable/Connector Pin-Outs Port Type Gigabit-SX Gigabit-LX Gigabit-LH Fiber-Optic Cables Cable Specifications Connector Type Maximum Length 62.5/125 mm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber-optic cables, complying with the ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respectively. LC - Gigabit-SX mini-GBIC SC - Gigabit-SX transceiver • 62.5 µm cable: - 160 MHz*km=220 meters - 200 MHz*km=275 meters • 50 µm cable: - 400 MHz*km=500 meters - 500 MHz*km=550 meters 9/125 µm (core/cladding) diameter, gradedin1310 nm, low metal content, single mode fiber-optic cables, complying with the ITU-T G.652 and ISO/IEC 793-2 Type B1 standards. OR the multimode fiber-optic cables listed for Gigabit-SX. LC - Gigabit-LX mini-GBIC SC - Gigabit-LX transceiver • single-mode cable: 10 kilometers • Multimode cable: 550 meters Note: To use multimode cables for Gigabit-LX, a mode conditioning patch cord may be needed - See the Installation Guide that came with your module for more information. 9/125 mm (core/cladding) diameter, gradedin1310 nm, low metal content, single mode fiber-optic cables, complying with the ITU-T G.652 and ISO/IEC 793-2 Type B1 standards. LC - Gigabit-LH mini-GBIC 70 kilometers Note: Between the transmit and receive ends of the cable, at least 5db of attenuation is required for a reliable connection. This is equivalent to 20Km of the fiber-optic cable. For distances less than 20Km, you must add attenuators to bring the total attenuation to at least 5db. Most cable vendors carry attenuators. Twisted-Pair Cable/Connector Pin-Outs The HP Auto-MDIX Feature:. In the default configuration, "Auto", the 10/100Base-TX ports on the 10/100-TX gl Module that is used in the Series 4100gl Switches all automatically detect the type of port on the connected device and operate as either an MDI or MDI-X port, whichever is appropriate. So for any connection, a straight-through twisted-pair cable can be used -- you no longer have to use crossover cables, although crossover cables can also be used for any of the connections. The 100/1000-T gl Module, and the 100/1000-T Transceiver supports the IEEE 802.3ab standard, which includes the "Auto MDI/MDI-X" feature, which operates the same way. Switch Ports and Network Cables B-3