HP Jetdirect 380x HP Wireless Print Server 380x - (English) Setup Guide - Page 30
Factory-Default Wireless Settings, Parameter, Setting, Comments
View all HP Jetdirect 380x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Factory-Default Wireless Settings Parameter Communications Mode Channel Network Name (SSID) Authentication Encryption (WEP) Setting Ad Hoc 10 hpsetup Open System none Comments If your network uses an access point, you must reconfigure the Communications Mode of the HP Jetdirect print server to "Infrastructure". (Ad hoc mode only) This specifies the broadcast channel if the print server fails to connect to a network. In most cases, you will not need to change this setting. The print server will scan all available channels for the specified network and will adapt its channel to the one detected. You must change the SSID on the print server to match your network. In infrastructure mode, you must match the SSID configured on the access point. The HP Jetdirect print server is not configured for network authentication. If required by your network, the proper authentication method must be configured on the HP Jetdirect print server. If your network uses WEP encryption keys, you must configure the encryption keys on the print server. You can configure up to four WEP keys. The active key must match the value and active key position (for example, Key 1) configured on other wireless devices. 3-2 Making a Wireless Network Connection