HP LH3000r HP Netserver LH 3/3r User Guide - Page 33
Replace cover 3. See Removing and Replacing the Covers.
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 5 Installing Additional Memory b. Choose a socket into which you want to install a DIMM. DIMMs may be installed in any combination, in any socket. c. Spread the two retaining clips on the socket outward. d. Align the notches on the DIMM with the keys on the socket. e. Holding the DIMM at 90 degrees to the system board, press the DIMM fully into the socket until the retaining clips close. If the clips do not close, the DIMM is not inserted correctly. 5. Repeat step 4 to install all of the DIMMs for your memory configuration. 6. Reinstall the system board in the HP NetServer LH 3r by inserting it into the chassis guides and pushing it inward as far as it will go. Refasten the latches to engage the system board with its socket and lock it into place. 7. Replace cover 3. (See Chapter 3, "Removing and Replacing the Covers.") 25