HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP Embedded Web Server - User - Page 66
Send to Folder,
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Send to Folder Use the Send to Folder screen to send scanned documents to shared folders or FTP sites. NOTE: The shared folders or FTP sites must be operational before using this tool to add them as destinations. The following illustration and table describe how to use the Send to Folder screen. Figure 4-2 Send to Folder screen Table 4-2 Send to Folder settings Callout Area on the screen 1 HP EWS tabs and menus 2 Help 3 Enable Send to Folder 4 Add 5 Edit 6 Remove 7 Remove all 8 Test Folder Access 9 WINS Server Information or capability that the area provides For more information, see Navigating through the HP Embedded Web Server on page 5. Click to open a help file that contains information about the screens on the Digital Sending tab. Select the Enable Send to Folder check box to turn on Send to Folder capabilities on the device. Enabling will put a Send to Folder icon on the front panel of the device. The user can select this icon to use this capability. Click Add to set up a new folder destination. Click Edit to view or change the settings for the predefined folder. Click Remove to remove the selected folder from the predefined folder list. Click Remove All to remove all the predefined folders from the list. Click Test Folder Access to test that a predefined folder is accessible by the device. Use the WINS Server setting to specify either the host name or IP address of the WINS server. This setting is necessary if Windows paths and folders are used as folder destinations. The WINS server must be specified when the path to the workstation or server is of the form \\host-name\ \mysharedpath. 54 Chapter 4 Setting the digital sending options ENWW