HP P2055d HP LaserJet P2050 Series - User Guide - Page 29

Menu Item, Description, Security, Reset, Firewall, Disable, Print, Cfg Link, 10t Half, 10t Full

Page 29 highlights

Menu item WEB SECURITY FIREWALL PRINT CFG LINK Description Embedded Web server accepts communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. ● HTTPS: Accept only HTTPS (print server appears as a secure site). ● HTTP/HTTPS: Accept either HTTP or HTTPS. Reset current security settings to factory defaults. ● KEEP (default): Retain current security settings. ● RESET: Reset security settings to factory defaults. Disable Firewall. ● KEEP (default): Retain Firewall operation as configured. ● DISABLE: Disable Firewall operation. Print a configuration page for the selected item. SECURITY: Print the current security settings. Manually configure the HP Jetdirect print server's network link. Set the link speed and communication mode. These must match the network. The available settings depend on the print server model. CAUTION: Changing the link setting can cause the loss of network communication with the print server. ● AUTO (default): Use auto-negotiation to set the highest link speed and communication mode allowed. If auto-negotiation fails, either 100TX HALF or 10TX HALF is set depending on the detected link speed of the hub/switch port. (A 1000T half-duplex selection is not supported.) ● 10T HALF: 10 Mbps, half-duplex operation. ● 10T FULL: 10 Mbps, Full-duplex operation. ● 100TX HALF: 100 Mbps, half-duplex operation. ● 100TX FULL: 100 Mbps, full-duplex operation. ● 100TX AUTO: Limits auto-negotiation to a maximum link speed of 100 Mbps. ● 1000TX FULL: 1000 Mbps, full-duplex operation. ENWW Network config. menu 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176

Menu item
Description
WEB
Embedded Web server accepts communications using HTTPS (Secure HTTP) only, or both HTTP
and HTTPS.
HTTPS
: Accept only HTTPS (print server appears as a secure site).
HTTP/HTTPS
: Accept either HTTP or HTTPS.
SECURITY
Reset current security settings to factory defaults.
KEEP
(default): Retain current security settings.
RESET
: Reset security settings to factory defaults.
FIREWALL
Disable Firewall.
KEEP
(default): Retain Firewall operation as configured.
DISABLE
: Disable Firewall operation.
PRINT
Print a configuration page for the selected item.
SECURITY
: Print the current security settings.
CFG LINK
Manually configure the HP Jetdirect print server's network link.
Set the link speed and communication mode. These must match the network. The available
settings depend on the print server model.
CAUTION:
Changing the link setting can cause the loss of network communication with the print
server.
AUTO
(default): Use auto-negotiation to set the highest link speed and communication mode
allowed. If auto-negotiation fails, either 100TX HALF or 10TX HALF is set depending on the
detected link speed of the hub/switch port. (A 1000T half-duplex selection is not supported.)
10T HALF
: 10 Mbps, half-duplex operation.
10T FULL
: 10 Mbps, Full-duplex operation.
100TX HALF
: 100 Mbps, half-duplex operation.
100TX FULL
: 100 Mbps, full-duplex operation.
100TX AUTO
: Limits auto-negotiation to a maximum link speed of 100 Mbps.
1000TX FULL
: 1000 Mbps, full-duplex operation.
ENWW
Network config. menu
17