HP Pavilion dm1-3000 HP Pavilion dm1 Notebook PC - Maintenance and Service Gui - Page 60
Display assembly, Remove the keyboard see
View all HP Pavilion dm1-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Display assembly Description 29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes webcam, microphone, nameplate, and logo) Verizon 29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes webcam, microphone, nameplate, and logo) Spare part number 635308-001 639610-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode, turn on the computer, and then shut it down using the operating system. 2. Disconnect all of the external devices that are connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the service cover (see Hard drive / Solid state drive on page 33). 6. Remove the hard drive (see Hard drive / Solid state drive on page 33). 7. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 39) and WWAN module (see WWAN module on page 37). 8. Remove the keyboard (see Keyboard on page 43). 9. Remove the top cover (see Top cover on page 46). Remove the display assembly: 1. Position the computer display-side up, with the front toward you. 2. Open the computer as far as possible. 3. Disconnect the display panel cable (1) from the system board. 52 Chapter 4 Removal and replacement procedures ENWW