HP Pavilion dm1-3000 HP Pavilion dm1 Notebook PC - Maintenance and Service Gui - Page 69
underneath the, heat sink.
View all HP Pavilion dm1-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
2. Remove the heat sink assembly (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink assembly and the system board each time the heat sink assembly is removed: Thermal pads are located on the heat sink (1) and on the base enclosure (2) underneath the heat sink. Reverse this procedure to install the heat sink assembly. ENWW Component replacement procedures 61
2.
Remove the heat sink assembly
(2)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the heat sink
assembly and the system board each time the heat sink assembly is removed:
Thermal pads are located on the heat sink
(1)
and on the base enclosure
(2)
underneath the
heat sink.
Reverse this procedure to install the heat sink assembly.
ENWW
Component replacement procedures
61