HP Pavilion zt1100 HP Pavilion Notebook PC ZE1000 Series - Startup Guide - Page 38

To replace the hard disk drive

Page 38 highlights

Add-On Devices Replacing the Hard Disk Drive Replacing the Hard Disk Drive To replace the hard disk drive You'll need a small (#0) Phillips screwdriver for this procedure. 1. Unplug the AC adapter, if present, and remove the notebook's battery. 2. Remove both hard drive retaining screws from the bottom of the notebook. Important 3. Pull the hard drive out of the notebook. 4. Carefully slide the new drive into the hard drive compartment. Press firmly to make sure its connector seats properly. 5. Reinstall the hard drive retaining screws. If you are installing a new hard disk drive, create a Utility partition on the drive before loading any software-see "To recover the factory installation of your hard disk" on page 50. To install the holder on a new hard disk drive or prepare a new hard disk for use, see "Replacing the Hard Disk Drive" in the online Reference Guide. 38 Startup Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

Add-On Devices
Replacing the Hard Disk Drive
38
Startup Guide
Replacing the Hard Disk Drive
To replace the hard disk drive
You
ll need a small (#0) Phillips screwdriver for this procedure.
1.
Unplug the AC adapter, if present, and remove the notebook
s battery.
2.
Remove both hard drive retaining screws from the bottom of the notebook.
3.
Pull the hard drive out of the notebook.
4.
Carefully slide the new drive into the hard drive compartment. Press firmly to make
sure its connector seats properly.
5. Reinstall the hard drive retaining screws.
Important
If you are installing a new hard disk drive, create a Utility partition on the drive before
loading any software
see
To recover the factory installation of your hard disk
on
page 50.
To install the holder on a new hard disk drive or prepare a new hard disk for use, see
Replacing the Hard Disk Drive
in the online
Reference Guide
.