HP Pavilion zt1100 HP Pavilion Notebook PC ZE1000 Series - Startup Guide - Page 45
Startup problems
View all HP Pavilion zt1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Troubleshooting and Maintenance Troubleshooting Techniques Startup problems If the notebook doesn't respond when you turn it on • Don't use the touch pad while the notebook is starting up or resuming from standby or hibernation. • Connect the AC adapter. • Reset the notebook by using a pin or straightened paper clip to press the system-off switch on the bottom of the notebook. Then press the power button to turn the notebook on. • If the notebook still doesn't respond, remove the battery and AC adapter, and remove any PC card. Then reset the notebook using the system-off switch on the bottom of the notebook, replace the battery and connect the AC adapter, and turn on the notebook by pressing the power button. • If you still get no response, call HP for assistance. If the notebook won't boot from battery power • Make sure the battery is properly inserted and fully charged. Check the battery's charge by clicking the power icon in the taskbar, or using Power Options in Control Panel. • If available, try another battery. If the notebook won't boot from the floppy disk drive • Make sure the floppy disk is bootable. • Make sure the floppy disk drive is selected as the boot device-see "To change the boot device" on page 26. Startup Guide 45