HP Photosmart 7345 HP Photosmart 7350 and 7345 printers - (English) Basic Guid - Page 45

Support and Services. See the, Reserve Mode. The printer

Get HP Photosmart 7345 PDF manuals and user guides View all HP Photosmart 7345 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Problem Printing is very slow. (continued from previous page) The printer will not turn on. The Print light is blinking green. The Print light is blinking amber. The Print light is blinking red. Possible cause Solution You may be printing in Reserve Mode. The printer enters Reserve Mode when one of the print cartridges is missing. Replace the missing print cartridge with a new one. The printer may have drawn too much power. Unplug the printer's power cord and wait approximately 10 seconds. Reconnect the power cord and press the POWER button to turn on the printer. The printer is plugged into a Turn on the power strip. power strip and the power strip is turned off. The printer may be processing information. Be patient. The printer needs some time to finish processing the information. The printer needs attention. Try the following: 1 Check the printer LCD, computer monitor, and the camera LCD for instructions. 2 If this does not work, turn the printer off. Unplug the printer's power cord, wait one minute, then plug it in again. Turn the printer on. A fatal error has occurred. Try the following: 1 Turn the printer off. Unplug the printer's power cord, wait one minute, then plug it in again. Turn the printer on. 2 If this does not work, check www.hp.com or contact HP Support and Services. See the Software Setup & Product Support booklet that came with your printer for contact information. troubleshooting: printer problems 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
troubleshooting: printer problems
41
Printing is very
slow.
(continued from
previous page)
You may be printing in
Reserve Mode. The printer
enters Reserve Mode when
one of the print cartridges is
missing.
Replace the missing print
cartridge with a new one.
The printer will not
turn on.
The printer may have drawn
too much power.
Unplug the printer’s power cord
and wait approximately 10
seconds. Reconnect the power
cord and press the
P
OWER
button to turn on the printer.
The printer is plugged into a
power strip and the power
strip is turned off.
Turn on the power strip.
The Print
light is
blinking green.
The printer may be
processing information.
Be patient. The printer needs
some time to finish processing
the information.
The Print light is
blinking amber.
The printer needs attention.
Try the following:
1
Check the printer LCD,
computer monitor, and the
camera LCD for instructions.
2
If this does not work, turn the
printer off. Unplug the
printer’s power cord, wait one
minute, then plug it in again.
Turn the printer on.
The Print
light is
blinking red.
A fatal error has occurred.
Try the following:
1
Turn the printer off. Unplug the
printer’s power cord, wait one
minute, then plug it in again.
Turn the printer on.
2
If this does not work, check
www.hp.com
or contact HP
Support and Services. See the
Software Setup & Product
Support
booklet that came
with your printer for contact
information.
Problem
Possible cause
Solution