HP Pro Tower 400 G9 PCI Desktop PC Maintenance and Service Guide - Page 31
Front bezel, Front bezel security, To install the front bezel, reverse the removal procedure.
View all HP Pro Tower 400 G9 PCI Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
system board. See System board connections on page 26 for an illustration of the system board drive connectors. Front bezel To remove the front bezel, use these procedures. Before removing the front bezel, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 19). 2. Remove the optical drive (see Optical drive on page 22). 3. Remove the access panel (see Access panel on page 19). Remove the front bezel: 1. Lift the three tabs that secure the bezel to the computer (1). 2. Rotate the top of the bezel downward (2), and then remove it from the computer. To install the front bezel, reverse the removal procedure. Front bezel security To install the silver 6-32 security screw into the front bezel, use these procedures. Before installing the front bezel security screw, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 19). 2. Remove the access panel (see Access panel on page 19). 3. Remove the optical drive (see Optical drive on page 22). Install the front bezel security screw: 1. Remove the security screw from the storage location in the computer chassis near the front bezel (1). 24 Chapter 4 Removal and replacement procedures